Laying out the upper longeron

The front fuse L’s at the firewall

Seat Back Channel

Part of the seat base

Rear Wing Spar attach point

More of the inside of the front fuse area

Gussets and fairings

Baggage area floor

Ready for the top skins (1)

Ready for the top skins (2)

Rear top skin in place

Front top skin in place

Front top skin trimmed to front hoop

Test fit of seat side. I found the bottom flange different from the plans. I’ll need an extra L angle as per the original photo guide

Hoop/fuse fittings

Outboard lower seat belt fitting

Ready for deburring and prime

Seat side all primed and in place

Front torque tube bearing in place

Horizontal Stabilizer fitted and top skin cut out

Main gear fitted

Nose Gear ready for painting

Rudder and Elevator Control cable fairleads

Rudder Pedals ready for painting

Sitting on its wheels

Center Console and instrument panel

Side step clecoed in place

Instrument panel support

Inside canopy flashing

Outside canopy flashing and hoops

Canopy fitted, needs riveting in place